
Manhasset: a connected estate
Control4 automation, Lutron lighting and shades, Ubiquiti networking, audio/video, alarms and surveillance from pre-wire through completion.
Sentry Audio Video designs, installs, troubleshoots and takes over managed home networks for residences and estates in Boca Raton, South Florida, Orlando and Windermere. Call (561) 717-3280 in South Florida or (407) 377-5360 in Central Florida.
Updated November 8, 2026 · Florida low-voltage license EF20001874 · Family-owned · Existing-system takeovers welcome
A strong Wi-Fi signal does not guarantee a reliable property network. Capacity, roaming, channel planning, switching, cabling, internet handoff, device separation and documentation determine whether hundreds of connected devices can operate together.
Control systems depend on predictable communication between processors, touchscreens, mobile devices, audio endpoints, televisions, cameras and cloud services. A poorly configured replacement router can disrupt discovery, remote access, AirPlay, Sonos or automation drivers even when basic internet browsing still works.
Sentry evaluates the entire technology system before changing network architecture.
We select platforms around the property, management requirements and service expectations. UniFi can provide integrated gateways, switching, Wi-Fi and Protect surveillance. Access Networks and Ruckus support demanding enterprise-style wireless designs. Araknis remains common in professionally integrated homes.
See our detailed Ubiquiti UniFi design, installation and service guide, or review residential IT support and takeover services.
For a network installed by another provider, we begin with ownership and access. We identify the UniFi console or cloud administrator, available credentials and backups, adopted devices, topology and any systems that could be affected by a change. We then review the gateway, switches, access points, PoE budget, VLANs, firmware, rack, cabling and internet handoff.
A takeover does not automatically mean replacing every device. Supported equipment that is correctly sized and in good condition may remain. The assessment documents what can be retained, which configuration problems should be corrected and whether repair, expansion or phased replacement is appropriate.
Wireless performance begins with wired infrastructure. Access points, cameras, AV-over-IP endpoints and control devices need properly terminated Cat6, Cat6A or fiber, suitable switch capacity, PoE budgets, ventilation, surge protection and organized racks.
Large properties may require outdoor access points, fiber between buildings, point-to-point links, dock coverage and separate guest or staff networks. Landscape, construction materials, hurricane-rated glass and neighboring networks all affect design.
Sentry troubleshoots weak coverage, intermittent roaming, double NAT, unmanaged switches, incorrect bridge mode, IP conflicts, damaged cabling, overloaded access points and undocumented networks. After the system is documented and stable, an appropriate service plan can define covered equipment, remote access, request procedures, response expectations and exclusions.
Use a property brief to separate a new installation, an expansion and the repair or takeover of an installed network. The useful starting point is what the household needs to do and where the existing system falls short.
Identify the main home, guest house, office, outdoor living areas and any other spaces in the proposed scope. Note where calls drop, video buffers or devices disconnect, when the issue occurs and whether it affects one device or several. For a new build, share the construction stage and available plans; for a finished home, describe accessible wiring and limits on opening walls.
List the installed control system, cameras, alarm communication, audio zones and work-from-home requirements. Include the internet provider and equipment brands if known. For an owner-authorized takeover or provider change, note whether account access and documentation are available; transfer credentials through an agreed secure process rather than the inquiry form.
Confirm which rooms or services may be interrupted and who can authorize the work. The proposal should identify retained equipment, planned cabling, configuration work and the functions to test. Before handover, walk the agreed indoor and outdoor areas with representative devices, check the included household systems and review owner access, documentation and support arrangements.
A coverage review and a speed test answer different questions. Agree which locations, activities and test conditions will be used to assess the completed work; equipment choices and internet-service limits should be clear before promising a result.
Send your network project brief with the property city, project type, affected areas and preferred timing.
Yes, subject to an onsite assessment and access to the existing system. We review account ownership, credentials, topology, equipment, cabling, cameras and smart-home dependencies before defining the takeover or upgrade scope. Call Orlando at (407) 377-5360.
No. We can retain supported equipment that has the required capacity and is in suitable condition. The assessment separates configuration and cabling problems from equipment that truly needs replacement.
Administrator access to the console or cloud account, available configuration backups, internet-provider information and any existing network documentation are helpful. If access is incomplete, we first determine what can be recovered safely before changing the live system.
The answer depends on construction, layout, device count, outdoor coverage and placement. Square footage alone is not enough.
Often. VLANs can improve organization and security, but they must be configured without breaking required discovery and control traffic.
Sentry provides network design, installation, takeovers, upgrades and troubleshooting across South Florida and Central Florida. Review our Orlando smart-home and low-voltage services or request a network assessment. Call (561) 717-3280 in South Florida or (407) 377-5360 in Orlando and Central Florida.
Select “Network wiring” in the service list and describe the Wi-Fi, wired-network or installed-system support you need. Choose new system, upgrade, service or takeover, and enter the actual property city. Include the building or room count, affected areas, equipment if known and preferred timing. No passwords or alarm codes are needed here.
Call (561) 717-3280 for South Florida or (407) 377-5360 for Orlando and Central Florida to discuss availability, scope and any assessment charges.
Coverage, wired backhaul, roaming and service access matter as much as the equipment brand. Read our large-home Wi-Fi comparison of Ubiquiti, Araknis and Access Networks, then schedule a review of the property and existing cabling.
Explore the scope, systems and actual project videos behind these Sentry Audio Video installations.

Control4 automation, Lutron lighting and shades, Ubiquiti networking, audio/video, alarms and surveillance from pre-wire through completion.
Explore related service options and practical guides before planning installation, upgrades or continuing support.
Planning a new build or renovation? Review structured cabling for new construction before walls close so network, camera, audio/video and control wiring are coordinated with the project team.